Host side 핀 아웃

Host Side Player 1 Port (left)

J3
DesignatorJ3
Emulated Player 1 side connector towards the GAME IO side
Connector141R-2.54-8P
Pin #Pin NameAnnotation
1V1-BUSYEmulated Busy state Output Signal
2V1-VENDEmulated Bill acceptor 1P Coin Insertion Output Signal
3V1-JAMEmulated JAM Output Signal
4V1-STARTEmulated 1P Start Button Output Signal
5V1-INHIBITInhibit Input Signal from 1P GAME I/O
6N/CNot Connected
7N/CNot Connected
812VProduct + Pole Power Input
912VProduct + Pole Power Input
10GNDProduct - Pole Power Input
  • Pins are counted from the right.
  • You can also input power directly into BillMock-HW through 12V and GND pins.
  • The power pins from this port cannot be used for power output. When power input to this port is blocked, reverse voltage does not flow.
  • The "Busy" output signal remains active low from the moment a payment signal is received from the credit card or when the VEND input signal goes active low until the VEND output signal toggles and completes.

Host Side Player 2 Port (right)

J2
DesignatorJ2
Emulated Player 2 side connector towards the GAME IO side
Connector141R-2.54-8P
Pin #Pin NameAnnotation
1V1-BUSYEmulated Busy state Output Signal
2V1-VENDEmulated Bill acceptor 2P Coin Insertion Output Signal
3V1-JAMEmulated JAM Output Signal
4V1-STARTEmulated 2P Start Button Output Signal
5V1-INHIBITInhibit Input Signal from 2P GAME I/O
6N/CNot Connected
7N/CNot Connected
812VProduct + Pole Power Input
912VProduct + Pole Power Input
10GNDProduct - Pole Power Input
  • Pins are counted from the right.
  • You can also input power directly into BillMock-HW through 12V and GND pins.
  • The power pins from this port cannot be used for power output. When power input to this port is blocked, reverse voltage does not flow.
  • The "Busy" output signal remains active low from the moment a payment signal is received from the credit card or when the VEND input signal goes active low until the VEND output signal toggles and completes.