BillMock Mini

Front side	Back side

Pin map overview

At the top, there are connectors for the Vend Side, which includes bill paper acceptors, coin acceptors, credit card reader, and similar currency validators.

At the bottom, connectors are placed for the Host Side, which interfaces with the mainboard of the actual arcade machine, such as the GAME I/O PCB.

On the left and right sides, you'll find identical connectors arranged in a decalcomania pattern. The connectors on the left are designated for Player 1, while those on the right are for Player 2.

With this pattern of connectors, it's easy to connect wires to the connectors during actual installation and operation by referring to the layout.

From a conceptual perspective, in the existing wiring, the connectors that were originally connected from top to bottom are each separated and connected to the upper and lower connectors. The hardware and software manage the communication between these upper and lower connectors. This design was intentional during the connection setup.

Simplified Connection of BillMock Mini

• WARN : The wire shapes are symbolic representations and do not indicate the actual wire colors used in the image. Please refer to detailed pinouts in the respective pages.

This configuration involves installing this PCB (BillMock) between the existing bill acceptor (or coin acceptor) on the top and the GAME I/O PCB on the bottom, with a harness connection.

In some cases, additional wiring work may be required, but considering the widely used bill acceptor wiring in South Korea, you can prepare the harness and connect it accordingly.

Specifications

• WARN : The input power allows up to 16V, but please be cautious as it is directly passed through to the bill handling device.